PHENIX MMS Fabrication

MMS Design/Fabrication update

You are visitor # since 07 June 1996

Current fabrication of the MMS (photo)
(16-Jan-1997) Updated version of the MMS drawings from Melco :DXF file ( Autocad R13 readable) and translated EPS file (Ghostview readable). (Added GIF files for preview on 17 Jan 1997.)
(OVERALL LAYOUT , final Rev. D) AK49004D.dxf, EPS, GIF
(Side Weight (hight changed)) A31M029A.dxf, EPS, GIF
(LOWER PLATE : hanging hole depth changed) AK49085A.dxf, EPS , GIF
(LOWER PLATE ASS.) AK49096A.dxf , EPS , GIF
(BACK PLATE ASS.) AK49097A.dxf, EPS , GIF
(PISTON CORE ASS.) AK49098A.dxf, EPS, GIF
(COIL INSTALLATION) AK50278A.dxf, EPS, GIF
(POWER BUS INSTALLATION) AK50520a.dxf, EPS, GIF
(TCUP&LAMP2PAN ASS.) AK50521a.dxf, EPS, GIF

(27-Dec-1996) Updated version of the MMS drawings from Melco :DXF file ( Autocad R13 readable) and translated EPS file (Ghostview readable)
(OVERALL LAYOUT , final Rev. C) AK49004C.dxf, Postscript(EPS )
(COIL INSTALLATION, product version) AK50221A.dxf, Postscript(EPS )
(FRONT COIL ASSEMBLY, final, Rev A) AK49005A.dxf, Postscript(EPS )
(REAR COIL ASSEMBLY, final, Rev C) AK49005A.dxf, Postscript(EPS )
(27-Nov-1996) Updated version of the MMS drawings from Melco : DXF file ( Autocad R13 readable) and translated EPS file (Ghostview readable)

LAYOUT
(OVERALL LAYOUT Rev. B) AK49004B.dxf, Postscript(EPS)
BACK Plate
(BACK PLATE ASSEMBLY) AK49097.dxf, Postscript(EPS)
(BACK PLATE), AK50291A.dxf , Postscript(EPS)
LOWER Plate
(LOWER PLATE ASSEMBLY) AK49096.dxf , Postscript(EPS )
(LOWER PLATE) AK49085.dxf , Postscript(EPS )
(SIDE WEIGHT) A31M029.dxf , Postscript(EPS )
PISTON
(PISTON CORE ASSEMBLY) A31M029.dxf , Postscript(EPS )
(PISTON CORE) A31K954B.dxf , Postscript(EPS )
(PISTON CORE) AN98282B.dxf , Postscript(EPS )
(THREADED PLATE) AN98247.dxf , Postscript(EPS )
LAMP_Pannel
(LAMP LOWPAN3) AK49070.dxf , Postscript(EPS )
(LAMP LOWPAN3M) AK49071.dxf , Postscript(EPS )
(LAMP LOWPAN4) AK49072.dxf , Postscript(EPS )
DONUT
(BIG DONUTS) A31K952.dxf , Postscript(EPS )
(DONUTS) A31K955a.dxf , Postscript(EPS )
OTHERS
(FinSupport) A31K949.dxf , Postscript(EPS )
(Splice Bar) A31K950.dxf , Postscript(EPS )
(Teacup Spacer) A31K951.dxf , Postscript(EPS )
(Lamp2pan) Al47852.dxf , Postscript(EPS )
(Teacup) Ak49044.dxf , Postscript(EPS )
(30-Aug-1996) Updated version of the MMS Coil layout from Melco (Shin).
  • DXF file (964kB) (Autocad R13 readable)
  • EPS file (330kB) (Ghostview readable) Overall layout will be appeared soon. Please wait a moment.
    (22-August-1996) From Melco. A good news from Melco (shin). The problem of the MMS coil (bus flag) design almost have been solved.
  • DXF file (483kB) (Autocad R13 readable)
  • EPS file (213kB) (ghostview readable)
  • JPG file (244kB)
    (2-August-1996) I (Walt @ LANL ) am sending you postscript file of four drawings made at Los Alamos that address some of the concerns for space requirements for the station 3 and station 2 tracking chambers. The four drawings (postscript file) are:
  • Muon South magnet 2D slice with stations 2 & 3
  • Muon South magnet 2D slice detail station 3 next to coils
  • Muon South manget 2D slice detail station 3 next to lampshade
  • Muon South manget 2D slice detail station 2 next to lampshade
    (21-July-1996) Three drawings from Dave Lee @ LANL wich shows space requiremnts for muon chambers and electronics. fig 1, 2, 3

    (18-July-1996) updated
  • This DXF file (1.8MB) shows the overall layout of MMS from Melco. (This DXF file may not work on Autocad R13, in such a case use jpeg below) [ obsolute1, obsolute2]
  • Converted large JPEG file (1.0MB) , small JPEG file (302kB) , this one works.
    (13-July-1996) These files show the FDR version of MMS in the parked position. (gif and tif, and postscript file ) from Art Posey (LLNL)
  • FDR version of MMS in the parked position

    (12-June-1996) Lowerplate/Backplate update from Art Posey(LLNL)
  • Lowerplate/Backplate update

    (10-June-1996) There are two propozal for the winding Methods of the MMS coils. One is based on the original design, the other is modified version by Melco. Accorindg to the original design, the 12-degree cone from the interaction point crosses over the surface of the coil. According to the Melco's Modified verion, the 12-degree cone does not cross over the coil (there is 4.2mm room). The Melco's Modified verion has been adopted.

  • MMS coil (original) Drawings [DXF 648kB], [gif 25kB] , EPS(187kB)] , Specification (gif 22kB)
  • MMS coil (Melco Proposal) Drawings [DXF 614kB], [gif 27kB] , EPS(182kB)] , Specification (gif 22kB)

    Fabrication of the MMS (photo)
    Current Fabrication status of MMN and MMN
    Return to the PHENIX-SPIN Home page
    17 January 1997 T.ichihara (ichihara@rikaxp.riken.go.jp)